Expert Answers about GMC Yukon XL
- What is the Towing Capacity of a 2014 GMC Yukon Denali XL and Should I Use Weight Distribution
- From what I was able to determine from my research, the 2014 GMC Yukon XL has a towing capacity of 7800 to 7900-lbs depending on the trim package; you'll want to consult the owner's manual for the best information on this for your Denali trim. When it comes to weight distribution hitches, they're not going to increase the towing capacity of your vehicle- you'll always be limited to the lowest rated component in your towing setup which would be the vehicle in this case.
When it comes to...
view full answer... - Clearance Dimension for Installed Timbren Jounce Spring Kit on 2003 GMC Yukon XL
- It is not a problem for the Timbrens to rest on the axle but they may affect your unloaded ride characteristics as you note. You can try shifting around the cargo load in the truck to see if this changes the spacing between the spring and axle. As noted in the instructions, which are linked for you, there may be no visible gap when this kit is installed on certain medium- and heavy-duty vehicles.
All suspension enhancement kits for your 2003 GMC Yukon XL, whether air bags or jounce springs,...
view full answer... - Overall Height of Andersen AM3410 Rapid Hitch Adjustable Ball Mount
- The upright portion of the # AM3410 adjustable ball mount that the ball platform slides up and down upon measures 9-1/16 inches in height, as shown in the provided photo.
In relation to the inside top of the receiver tube, the # AM3410 offers a maximum rise of 6-1/2 inches and a
maximum drop of 5-1/2 inches.
I've linked to a product video featuring the # AM3410 adjustable ball mount.
view full answer... - What is the Space Between the Mounting Holes on License Plate Light # LP21CB
- The mounting holes on the Optronics License Plate Light # LP21CB are 2 inches apart on center. I have included a picture showing the measurement and linked a video review of this light for you.
view full answer... - Will Classic All-Season Cover for Zero-Turn Lawnmowers # CA73997 Fit a 50-Inch Mower Deck
- I spoke with my contact at Classic Accessories and they said the Classic All-Season Cover for Zero-Turn Lawnmowers, w/ 50-inch Deck, part # CA73997, is measured for the 44 inches at the rear of the lawn mower. The cover does extend out with the elastic hem on the cover to cover up to a 50-inch deck in the width.
It does not have tie-downs. It has reinforced air vents that will let air circulate and prevent ballooning in the wind. It also has an elastic shock cord in the bottom hem to...
view full answer... - Roof Top Tent Capacity For 2007 GMC Yukon
- Per the 2007 GMC Yukon XL owners manual "Loading cargo on the luggage carrier that weighs more than 200 lbs (91 kg) or hangs over the rear or sides of the vehicle may damage your vehicle" so that provides a ballpark roof weight limit. Yes the Malone AirFlow2 Roof Rack # MPG216 rack system has a weight limit of 165lbs.
That said, there are two types of weight loading capacities for roof racks. These are the Static Weight Loading Capacity and Dynamic Weight Loading Capacity. Static is...
view full answer... - Recommended Roof Rack for a 2023 GMC Yukon XL w/ Flush Mounted Rails
- To add a roof rack to your 2023 GMC Yukon XL, I recommend the roof rack by Thule and it includes the following parts:
Thule WingBar Evo Crossbars - Aluminum - Black - 60" Long - Qty 2 item # TH711520
Evo Flush Rail Feet for Thule Crossbars - Flush Side Rails - Qty 4 item # TH710601
Fit Kit for Thule Evo Flush Rail and Edge Flush Rail Roof Rack Feet - 6117 item # TH95JW
This aero bar roof rack system has a 165 lbs capacity. The dual rubber WindDiffuser strip in the top channels dramatically...
view full answer... - What is The InsideLength Of Yakima SkyBox Roof Cargo Box Y07336?
- We have measured the interior of the Yakima SkyBox Cargo Box - 18 cu ft - Black # Y07336 in our warehouse. It has inside length of approximately 78-1/2 Inches or 199 CM of useable space. This box requires a crossbar spread of 24" - 42"; crossbar spread is the distance from the center of the front crossbar to the center of the rear crossbar. I attached a demonstration video for you to check out regarding this cargo box.
view full answer... - Dimensions of Draw-Tite Adjustable Ball Mount 6580
- I've got some dimensions on the Adjustable Ball Mount # 6580 that you should find helpful here, and I've also created a diagram to show them. The distance from the center of the hitch pin hole to the center of the holes on the rise/drop are 7-1/2". The distance from the center of the hitch pin hole to the center of the ball mount is 12".
view full answer... - Does Weight Capacity of Blue Ox Hitch Extender Refer to Trailer or Flat Towing
- That was a confusing way to phrase that and I apologize. The Blue Ox Hitch Extender for Tow Bars # BX88265 was designed for use with tow bars so the 10,000 lb towing capacity is in reference to how heavy of a vehicle it could flat tow.
view full answer... - Distance from Center Hitch Pin Hole to Anti-Rattle Pin Fastway DTSTBM7000-2S
- The distance from the center of the hitch pin hole to the furthest away edge of the anti-rattle pin that extends out of the top of the ball mount's shank is right at 2-1/8 inches, as you can see in the photo I've edited for you.
view full answer... - Distance From Coupler To Center Of Axle On Malone LowBed MicroSport Trailer MPG464-LB
- I reached out to my contact at Malone and the Malone LowBed MicroSport Trailer - 78" Crossbars - 800 lbs # MPG464-LB you were looking at measures 138" or 11-1/2' from the coupler to the center of the axle.
I included a video of the # MPG464-LB for you to take a look at.
view full answer... - What is the Difference in the WeatherTech HP 2nd and 3rd Row Rear FloorLiner for a 2020 Yukon XL?
- The WeatherTech HP 2nd and 3rd Row Rear FloorLiner item # WT57DD fits the 2020 Yukon XL's with 3 rows of seats, 2nd row bench seat and 3 rows of seats, 2nd row bucket seats.
The WeatherTech HP 2nd and 3rd Row Rear FloorLiner item # WT36CB fits the 2020 Yukon XL's with 3 rows of seats and 2nd row bucket seats.
Either one will work for your Yukon XL with 3 rows of seats and 2nd row bucket seats.
view full answer... - Is There Single Ball Version of B and W Tow n Stow with 9 inches of Drop
- For an adjustable ball mount with a single ball on it that can do 9 inches of drop like the # BWTS10043B that you referenced we have the Gen-Y Ball Mount part # GY42FR but we don't have a single ball version of the B and W you referenced. Then for a hitch ball to fit the platform you'd need the part # 63845 for a 2 inch ball.
view full answer... - Size of Installation Bolts for Curt C15324 Class V Hitch on 2003 GMC Yukon XL
- Take a look at the diagram I provided, which shows the bolt sizes included with the hitch. Four 1/2-13 X 1-3/4 carriage bolts are included, and the other two bolts that are used are preexisting on the vehicle- they're used to hold the bumper bracket to the frame. You'd just remove those before installing the hitch then reinstall them after hitch hitch is in place.
As those existing bolts aren't supplied, Curt couldn't tell me the size of the bolts, but if they're missing on your vehicle,...
view full answer... - Dimensions Of Gen-Y Shock Absorbing 5th Wheel to Gooseneck Pin Box GY66FR
- The Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box - Lippert 1621/1621 HD - Auto Latch - 25K # GY66FR you were looking at is a confirmed replacement for your Lippert 1621 HD pin box and will not require any shims.
The # GY66FR has the same height adjustments as your current pin box, but will be roughly 2" shorter overall than your current pin box so depending on the bed length of your truck you may have cab to trailer clearance issues if not using an offset gooseneck ball....
view full answer... - What Is The Axle To Frame Clearance When Timbren Silent Ride TSR10KT02 Is Installed?
- I reached out to my contact at Timbren and on the Timbren Silent Ride Suspension for Tandem Axle Trailers w/ 3" Round Axles - 10,000 lbs # TSR10KT02, the 6-1/2" measurement from the center of your 3" axle to the bottom of the frame is with the trailer unloaded.
When the arms are fully compressed there will be 2" of clearance.
I included a video of the # TSR10KT02 for you to take a look at.
view full answer... - Weight Capacity of Blue Ox Base Plate Adapter Brackets for Demco Tow Bars
- I spoke with my contact at Blue Ox and he stated that the Base Plate Adapter Brackets # BX88310 that you referenced feature a 10,000 pound capacity. This is the case with all of their base plate adapter brackets. With this in mind you do not need to worry about utilizing the full towing capacity of your existing Demco Excali-bar Tow Bar when using the adapters.
view full answer... - Selecting Reese Strait-Line Weight Distribution/Sway Prevention System for Travel Trailer
- The Reese Strait-Line weight distribution/sway control systems such as the # RP66083 actually prevent trailer sway from starting in the first place, rather than try to correct it once the problem has started. We consider them to be the superior choice in WD systems.
The key to matching a Strait-Line to your set-up is knowing your trailer's fully-loaded TW just as it will be when you head out on the road: you need to measure the TW when the trailer is fully loaded with water, propane, food,...
view full answer...
Go To Results